Skip to content
Kempenfelt Bay Garage Door Co.Request a visit
Open 24/7(249) 315-4741Call now
Two detached black sensors with recessed lenses and coiled wires lie in a tray beside a mounting bracket. — Photo-Eye Sensor Alignment or Replacement, Tollendal

Book soon Openers · Tollendal

Photo-Eye Sensor Alignment or Replacement in Tollendal

Since shelving went up along the garage wall, the door will not close and both sensor lights are dead. A screw or staple may have gone through the thin wire that runs from the opener to the sensors.

Call now · open 24/7(249) 315-4741

Request a visit

Right now

Before the door is looked at

Call (249) 315-4741, open 24/7.

  1. Never bypass, tape over or relocate the sensors to make a door close; a door that reverses is reporting something worth fixing.

In plain words

Two small sensors face each other across the doorway: one sends an infrared beam, the other receives it. While the beam lands on the receiver, the opener will close the door; the moment anything interrupts it, the door stops and returns to open. Every sensor call comes down to why the receiver has lost the beam: an object, a bent bracket, a dirty or frosted lens, sun in the receiving eye, a broken wire or a tired sensor. The technician works through those in order, fixes the one that applies, and shows you the steady indicator lights that mean the pair is talking again.

Sound familiar?

The door will only go down while a finger stays on the wall button; let go and it stops or reverses. From the remote it opens fine but never closes, so someone has to stand in the garage every time.

How the visit goes

Photo-Eye Sensor Alignment or Replacement · Tollendal

How the visit goes

Technician at a blue ladder working under a black and white opener, with a red pull cord hanging beside it. — Tollendal
  1. 1

    Ruling out sun, frost and reflections

    A sensor that misbehaves on a timetable is usually being blinded rather than broken. The technician notes which way the door faces, where the low sun reaches the floor in the morning and late afternoon, and whether a receiving lens looks into that light or into a reflection off a parked car, a white wall or fresh snow. Lenses are checked for frost, condensation and a film of salt, common in an unheated garage. A hand cupped over the receiving eye while the light is watched is a simple test: if the indicator settles when the eye is shaded, the fix is a side swap or a small hood rather than new parts.

  2. 2

    Repairing the wire run

    Damaged wire is dealt with in whole sections rather than patched at a single point. A pierced or chewed length is cut back to sound insulation and either spliced with proper connectors or, more often, replaced from the sensor to the nearest good junction. Where the run has failed in more than one place, a fresh two-conductor wire is stapled from the motor housing across the ceiling and down both sides of the opening, kept clear of the track, hinges and the door's travel. At the head unit the pair is landed on the correct low-voltage terminals with polarity confirmed, and the sensor lights are checked before anything is tidied.

  3. 3

    Wiring that stays put

    The wire between the head unit and the sensors has been secured along the ceiling and walls, clipped clear of the track and, where it was exposed, run inside a protective channel. Two things keep it that way. First, when anything is fastened to those walls or that ceiling, from shelving to a bike hook to drywall, look for the thin wire before driving a screw or a staple. Second, if mice have been in the garage, a chewed wire is a common sign, so a dark sensor light after a sighting is worth a look at the run. Either way, the sensor lights will tell you the moment the circuit is open.

In the van

  • Receiving-eye sun shade
  • Wing nuts and carriage bolts
  • Concrete anchors
  • Track-mount sensor brackets
  • Matched photo-eye sensor pair

What affects the quote

  1. 1

    An opener without a sensor circuit

    Where the operator predates monitored sensors and cannot accept a pair, the quote changes shape into a modern operator with its own sensors, which is discussed as a separate decision rather than folded in.

  2. 2

    Sun and reflection remedies

    Swapping the sensors side to side is a small addition when the wiring reaches. Fitting a shade, or extending the wire so the receiver can move, is a little more and is listed on its own.

  3. 3

    Force and travel adjustment alongside

    If the reversing turns out to involve a travel limit set long or a force setting made in summer, adjusting and re-testing those settings is included as a small extra step.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(249) 315-4741

Photo-Eye Sensor Alignment or Replacement: questions

Advice · (249) 315-4741

My opener has no sensors at all. Can they be added?

If the opener predates the entrapment-protection standard, which operators have had to meet since the mid-1990s, its board has no sensor circuit and a pair cannot simply be wired in. The positive news is that a modern operator brings the whole package: matched sensors, force reversal and a monitored circuit. The technician confirms the model first, because some units do have the terminals and simply had their sensors removed.

Do sensors wear out with age?

They do, slowly. The infrared emitter and the receiver dim over many years, lenses craze or cloud from sun and salt, housings crack, and water finds its way in at floor level. A pair that needs re-aligning more and more often, or whose light drifts between steady and flickering with nothing touched, is usually ageing. Because pairs are matched to the opener, an older opener is worth identifying early so the right replacement is on hand.

Is it all right to keep using the door until the visit?

Use the door in a way that keeps you in control. If the opener closes only while the wall button is held, do that only while you can see the whole doorway and nobody is near it. Otherwise close the door first if you can, then move it by hand with the manual release, and get help if it feels heavy or binds. Keep children and pets clear during any test. A door that reverses is being cautious on your behalf.

Photo-Eye Sensor Alignment or Replacement near you

Simcoe, Ontario

Tollendal information

Town
Tollendal, Simcoe, Ontario
In business
22 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

29%

Newer homes. About 29% of homes in Barrie were built in 1980 or earlier, according to the 2021 Census.

Newer houses often have a double door over a two-car garage, which means a heavier door, a pair of torsion springs and cables that must be matched exactly. Replacing springs on these doors is done in pairs so the door lifts level and the opener is not fighting one side.

58%

A mix of homes. Single-detached houses make up about 58% of homes in Barrie (2021 Census).

In mixed neighbourhoods, noise matters differently from one address to the next. A detached house with a bedroom above the garage and a townhouse with a neighbour through the wall both benefit from a belt-drive opener and nylon rollers, and we explain the difference either way.

Source: Statistics Canada, 2021 Census of Population

Open Tollendal in Google Maps

Open 24/7

Request a visit

Since shelving went up along the garage wall, the door will not close and both sensor lights are dead.

Call now · open 24/7(249) 315-4741
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 22 years in business